Blackguard Hand Forged 1095 High Carbon Steel Bowie Knife with Stag Horn and Black Micarta Handle and Steel Guard and Butt Cap | Hunting Bowie Gift | RK-574

The Blackguard is a Bowie knife for people who notice the difference between a knife that was made and a knife that was manufactured. 1095 high carbon steel blade with a clip point, stag horn and black micarta handle, polished steel guard and steel butt cap, 13 inches overall with an 8 inch blade. It ships in a cowhide leather pouch cut for right hand carry. How this shape differs from a bowie is set out in the seax and bowie compared.

The Bowie is the only American blade pattern that got famous because of a single fight. In September 1827 a duel on a sandbar in the Mississippi near Natchez turned into a general brawl, and Jim Bowie, shot and stabbed, killed a man with a large knife of his brother Rezin’s design. The story ran in every newspaper in the country. Within a few years every man who could afford one wanted a knife like it, and Sheffield, which had the industrial capacity America lacked, spent the next fifty years shipping Bowie knives back across the Atlantic by the crate. The clip point profile you are looking at is the shape that came out of that scramble, and it survived because it works.

The Blackguard is forged and finished in the Czech Republic, and shipping inside the United States is free.

Specifications

What the clip actually does

The clip is the section taken out of the spine near the tip, and it is the whole point of the pattern. Take a plain spear or drop point blade and the tip sits high, more or less in line with the spine. That is strong, but it puts the point well above the centreline of the blade, so when you drive it forward the force does not run straight through it and the tip skates.

Cutting the clip does two things at once. It lowers the point toward the middle of the blade, which lines it up with the axis of the thrust, and it removes metal from behind the tip so the point is thinner and enters more easily. That is why a clip point pierces so much better than a drop point of the same size. The unsharpened top edge left behind is called the false edge, and on a knife this size it also acts as a stiffening rib.

Behind the clip the blade keeps a deep, long belly. That is the part that does the actual cutting work, and it is why a Bowie of this length is still a genuinely useful field knife rather than a novelty. The guard is not styling either. On an 8 inch blade with any real force behind it, a wet hand slides, and the guard is the only thing stopping it. Everything about the pattern is a compromise between a knife that cuts and a knife that stabs, which is exactly what it was designed to be.

Why 1095 high carbon steel

The blade is 1095 high carbon steel, hardened to 54 to 58 HRC. That leaves it hard enough to hold a working edge through rope, hide, cardboard and wood, and tough enough to take a knock without chipping. It sharpens quickly on an ordinary stone. The trade is that 1095 is not stainless, so it wants wiping dry and a light oil after use. The general steel comparison sits in Damascus versus stainless.

Stag horn, black micarta and the steel fittings

The handle pairs stag horn with a black micarta butt section, set behind a polished steel double guard and finished with steel spacers and a steel butt cap. These are two very different materials chosen for two different reasons. Stag horn is natural keratin, warm in the hand, irregular in surface texture and one of the best wet grips there is. Micarta is layers of linen or canvas set in resin and cured under pressure, and it is the material you choose when a handle has to be completely indifferent to weather. It does not swell, shrink, rot or crack, it holds its grip when wet, and it is chemically stable in a way no natural material is.

Because micarta is inert, it needs no maintenance at all: soap and water is the whole routine, and nothing you can do at home will damage it. The stag horn does want attention, and it is the same routine timber gets, a light coat of oil once or twice a year to stop it drying and to keep it from shrinking against the fittings. The method is in wooden handle care and applies to horn without change. Do not oil the micarta, and do not leave either of them on a heat source.

Engraving, runes and your own design

Use the rune converter on this page to turn a name, a date or a short phrase into Elder Futhark and we will cut it into the steel or the handle. If you would rather have a Viking pattern than a rune line, choose your own design in the engraving option above the add to cart button and tell us whether it goes on the blade or the handle. Where a piece already carries an engraved design, your chosen engraving replaces it rather than sitting alongside it. Engraving into the hardened blade is cut rather than scratched and holds a crisp line for the life of the knife. The wide flat below the clip is the natural place for it. See the engraving page.

Care and sharpening

1095 is a plain carbon steel and will rust if it is left wet, so wipe it dry and give it a light oil before storage, especially if the knife lives in a leather pouch. Vegetable tanned leather holds moisture and mild acid against steel, so for long storage take it out of the pouch.

Sharpening needs a coarse stone to reset the bevel and a finer one to finish. 1095 cuts quickly on ordinary water stones and takes a fine, keen edge without much effort. The method is in steel care and sharpening with a whetstone.

Made in the Czech Republic

This is a handmade piece from the Czech Republic, made in a workshop that still forges, grinds and finishes by hand instead of stamping parts out. The smiths there have kept the older way of working, and the wood, horn and leather are shaped and fitted by hand as well. Two pieces of the same design will never be identical, and that is part of what you are buying.

Ransack Viking is a United States company. We handle the import ourselves, look over every piece when it lands and ship from our warehouse in Chicago, Illinois. Engraving is done in the United States after the piece arrives, so your design goes on before we send it out.

A note on handmade variation

This Bowie is hand forged. It is not machine made and it is not bulk produced, so what arrives will not be a pixel for pixel copy of the photograph. The stag horn is marked by the animal it came from, the micarta figures differently as it is ground, the fittings are cut by eye, and the sweep of the clip and the belly shift by fractions because a person ground them. The dimensions, the steel and the build are the same every time. The character is not.

Frequently asked questions

Is the false edge on the clip sharpened

It ships unsharpened as a false edge, which is the usual arrangement and keeps the tip stiffer. Tell us in the order notes if you want it sharpened and we will do it before the knife goes out.

Is it hard to sharpen

No. 1095 high carbon steel responds quickly to an ordinary whetstone and takes a fine edge without a fight.

Will it rust

It can. 1095 is a carbon steel, not stainless, and left wet or exposed to salt it will spot. A wipe and a thin oil before storage prevents it.

Does the micarta need any care

None. Wash it and forget it. The stag horn beside it wants an annual coat of oil, which is the only maintenance the handle asks for.

Can the pouch be made for left hand carry

The cowhide pouch as shown is cut for right hand carry. If you want it built the other way, say so in the order notes before the leatherwork starts.

How does this compare to a camp knife of the same length

A camp knife puts everything into cutting and chopping with a plain point. This trades a little of that for a point that pierces properly, which is what the clip buys you.

What is in the box

• One Blackguard 1095 steel Bowie knife
• Cowhide leather pouch, right hand carry
• Protective packaging
• Forged and finished in the Czech Republic

Explore the range

Compare it with the rest of Bowie Knives, the field blades in Hunting Knives, the double edged pieces in Dagger Knives and the Norse profiles in Viking Knives. Steel and leather reasoning is written up in the guides.

Worth a look beside this

Next along the rack is the Inlayspire dagger knife, high carbon steel. For a straight comparison, see the Longspire dagger knife, pattern welded Damascus. Worth putting side by side with this is the Hornspire dagger knife, pattern welded Damascus.

If you are putting a set together, the Sawthane bowie knife sits alongside it. Or start from a blank sheet on the custom hunting knife page.