Tinebraid Hand Made Carved Bone Viking Comb with Celtic Knotwork & Riveted Spine | Beard and Hair Grooming Gift | RK-1691

This is a Viking style grooming comb carved from bone, with a knotwork panel running the full length of the spine, three ring and dot roundels cut into that panel, a short Elder Futhark line, and five bronze rivets set across the back in the old composite pattern. The teeth are cut fine and even, and every one of them is rounded at the tip so the comb passes through hair and beard without dragging or scratching the skin underneath.

Combs turn up in Norse graves and settlement layers far more often than swords do. They were personal, they were carried, and they were buried with people who owned nothing else worth burying. The Vikings had a reputation among their neighbours for grooming, and an English chronicler writing in the eleventh century grumbled that the Danes combed their hair every day and bathed on Saturdays, which he felt gave them an unfair advantage with English women. Historic combs were almost always composite pieces, several tooth plates riveted between two long side plates, because a single slab of antler wide enough for a whole comb is rare. The riveted spine on this comb repeats that build honestly rather than faking it with a printed line.

Each comb is cut, carved, filed and polished by hand in our Memphis workshop. The knotwork is worked with hand gravers, not stamped, and the rune line is cut with the same tools. It ships in a natural linen drawstring pouch with a care card.

Specifications

Why the rivets are there and what the ring and dot means

The five bronze rivets across the spine are not decoration borrowed from nowhere. Real Viking age combs were built in three parts, a row of short tooth plates sandwiched between two side plates and pinned through with iron or bronze rivets, then the teeth were sawn after assembly so they lined up across the joins. That construction existed because antler is strong along the grain and splits along it too, so a comb cut in one piece from a wide slab would have snapped the first time someone forced it through wet hair. The riveted build spread the load and let the maker use narrow offcuts.

The ring and dot roundels are one of the most persistent motifs in northern European bone and antler work. They run from the Roman iron age through to the medieval period, and archaeologists find them on combs, gaming pieces, pins and casket mounts across Scandinavia, the British Isles and the Baltic. They were cut with a simple centre bit that scribed the circle and the dot in one pass, which is why the spacing is often so regular on genuine finds. On this comb they sit as three punctuation marks along the knotwork band, breaking the interlace so the eye can follow it.

Bone as a comb material

Bone is not a decorative substitute for plastic here, it is the better material for the job. It is dense, it takes a very fine polish, and it holds a cut edge on the tooth tips that stays smooth instead of developing the burrs a moulded plastic comb grows after a few months. It also carries far less static than plastic, which matters if you have fine hair or a dry beard, because a static charged comb lifts hair away from the comb instead of ordering it.

Bone is a natural material and it behaves like one. Colour runs from a pale ivory cream through to a warmer honey tone, and each blank carries its own faint grain lines and occasional darker flecks where the structure of the bone shows through. It is not bleached white, and it is not dyed. Over years of handling, bone picks up a slightly deeper colour from skin oils, in the same way a wooden tool handle does. That is normal and most people prefer it.

Engraving, runes and your own design

Use the rune converter on this page to turn a name, a date or a short phrase into Elder Futhark and we will cut it into the steel, the leather or the wood. If you would rather have a Viking pattern than a rune line, choose your own design in the engraving option above the add to cart button and tell us where it goes. Where a piece already carries an engraved design, your chosen engraving replaces it rather than sitting alongside it.

On this comb the natural place for a rune line is the smooth panel on the spine where the existing short line sits. Bone cuts cleanly and holds a crisp line, so names and dates read well even at small size. There is more on lettering, placement and lead time on the engraving page.

Using it on beard and hair

The tooth pitch here is fine rather than wide, which suits a beard up to about medium length, a moustache, and hair that is straight to gently wavy. If your beard is long, thick and prone to knots, work through it first with your fingers or a wide tooth comb and then use this one to finish and shape. Forcing a fine comb through a knot is how combs of any material break, bone included.

For beard oil or balm, put the product on your palms first, work it into the hair, then comb through. Combing the product in with the comb loaded rather than the beard loaded leaves streaks. The rounded tooth tips mean you can press the comb against the skin at the jawline without scratching, which is what makes shaping a beard line possible with one hand.

Care

Wash the comb in warm water with a drop of mild soap when the teeth start to hold product, then rinse and dry it with a cloth. Do not soak it, do not put it in a dishwasher, and do not leave it sitting in a wet shower tray, because bone is porous and prolonged soaking will lift the surface and dull the polish. Once or twice a year, wipe a little mineral oil or a neutral beard oil over the whole comb with a cloth and buff it off. That feeds the surface and keeps the cream tone even. Store it in the linen pouch, which stops the teeth knocking against keys and coins in a bag.

Made in Memphis

This comb is made in our workshop in Memphis, Tennessee. It is not pulled from an importer catalogue, rebranded and drop shipped. We cut the blank, carve the knotwork, drill and set the rivets, saw the teeth and polish it here. Because that is one person at a bench rather than a moulding line, current lead time is one to two weeks before it leaves us, and shipping inside the United States is free. Every piece we make carries a lifetime warranty against defects in the making, with no end date and no receipt needed.

A note on handmade variation

This comb is hand made, not machine made and not bulk produced, so what arrives will not be a pixel for pixel copy of the photograph. Bone is a natural material and every blank has its own tone, its own faint grain and its own small darker flecks. The knotwork is cut by hand, so the interlace has the slight unevenness of a human line rather than the dead regularity of a stamp. The rivets are set individually and sit fractionally differently on every comb. The length, the tooth pitch, the material and the build are the same every time. The character is not, and that is the point of buying something a person made.

Frequently asked questions

Is this real bone or a bone effect resin?

It is real bone, carved and polished. You can see the grain under a raking light and you can feel the density in the hand, which is noticeably heavier than a resin comb of the same size.

Will the teeth snag a thick beard?

Not if you detangle first. Each tooth tip is rounded by hand before polishing, so the comb glides rather than catches, but a fine pitch comb of any material will fight a knot. Fingers first, then this comb.

Can I get my own runes on it?

Yes. Use the rune converter on this page for a name, a date or a short phrase and we will cut it into the spine panel. Your chosen engraving replaces the existing rune line rather than sitting next to it.

Will it turn yellow?

Bone deepens slightly in tone with years of handling, which reads as warmth rather than yellowing. Occasional oiling keeps the colour even. It will not go blotchy unless it is repeatedly soaked and dried.

Is the pouch included?

Yes. The natural linen drawstring pouch ships with every comb and is sized to hold it without forcing.

How long will it take to reach me?

Current making time is one to two weeks, and United States shipping is free. Add a few days if you have ordered custom rune engraving, because that is cut after the comb is finished.

What is in the box

• One hand carved bone Viking comb with knotwork spine and bronze rivets
• Natural linen drawstring pouch
• Care card with oiling and washing instructions
• Lifetime warranty against defects in the making
• Made and finished in Memphis, Tennessee

Explore the range

See the rest of the Viking combs, browse accessories, look through the engraved and personalised pieces, or read the guides for more on Norse grooming and material care.