Stagcurve Hand Forged 1095 Steel Gut Hook Hunting Knife with Stag Antler Handle & Tan Leather Sheath | Deer Field Dressing Gift | RK-1560

Key Features:

  • Material: Hand forged 1095 high carbon steel at 56 to 58 HRC, hand polished to a mirror.
  • Blade: Approximately 4 inch flat ground drop point with a cut gut hook in the spine.
  • Handle: Genuine stag antler scales, pinned, with a brass bolster and lanyard hole.
  • Detail: Acid etched Elder Futhark line on the blade flat. Monosteel, not Damascus.
  • Sheath: Wet formed tan leather belt sheath, saddle stitched and burnished.
  • Honest note: Carbon steel, so it must be dried and oiled after use.
  • Personalisation: Elder Futhark rune engraving or your own Viking design.
  • Hand Made in Memphis, Tennessee.

$179.00

Personalise this piece

Charged per piece and added at checkout.

  • Free US shippingOn every order, no minimum
  • Lifetime warrantyAgainst any defect, forever
  • Hand ForgedShips from Memphis, Tennessee
  • Secure checkout256-bit SSL encrypted

Add a name, a date or a line of Norse runes. See engraving options

4.99 from 1,552 verified reviews

The details

Included
Leather sheath
Reference
RK-1560

Features & Compatibility

A gut hook hunting knife with a mirror polished 1095 blade, a deep hook cut into the spine behind the point, a brass bolster and a scale handle in genuine stag antler pinned through with a lanyard hole at the butt. A short Elder Futhark line is etched along the flat above the edge. It comes in a tan leather belt sheath, stitched and burnished.

The gut hook is one of the few genuinely modern additions to a hunting knife and it earns its place. Opening an animal from the sternum to the pelvis with a plain point means running a sharp tip along the inside of the hide with the belly wall directly underneath it, and if you slip you puncture the paunch and ruin a good deal of meat. A hook does the job from the other direction: you push the point through once, turn the knife over, drop the hook under the hide and pull. The blade edge inside the hook cuts hide from underneath while the rounded back of the hook rides along the muscle wall and cannot cut it. It is a small idea that saves an enormous amount of mess. This knife is forged, ground, heat treated and fitted in Memphis, Tennessee.

Specifications

Steel1095 high carbon, mirror polished
Hardness56 to 58 HRC
Blade lengthApproximately 4 inches
Overall lengthApproximately 8 and a half inches
GrindFlat ground drop point with a cut gut hook in the spine
HandleGenuine stag antler scales, pinned, with a brass bolster and a lanyard hole
DecorationEtched Elder Futhark line on the blade flat
SheathTan vegetable tanned leather belt sheath, stitched and burnished
SKURK-1560

How to actually use the hook

Most people who buy a gut hook never learn to use it properly, and then complain that it drags. The trick is that the hook cuts on the pull, not the push, and it wants to be almost perpendicular to the hide rather than dragged along at a shallow angle. Make your initial entry with the point, roll the knife so the spine faces down and the hook faces up under the hide, then pull toward you in a steady sweep with the handle low. The hide feeds into the throat of the hook and the edge inside does the work.

Two things ruin the experience. The first is a dull hook, which will tear rather than cut and takes twice the force. The second is trying to use the hook through hair rather than under hide, which packs the throat and stops it dead. Enter through a slit and stay under.

The rest of the blade is a normal flat ground drop point, which is the right shape for the rest of the job. A drop point puts the tip below the line of the spine so it is easier to control inside a body cavity, and the belly ahead of the ricasso gives you a proper cutting curve for skinning and for breaking down quarters.

1095, the polish and the antler

The blade is 1095 high carbon, hardened to 56 to 58 HRC. That is the range where a hunting knife makes sense: hard enough to take a keen edge and hold it through a whole animal, soft enough that the tip and the thin throat of the hook will not chip if you catch a rib. 1095 is not stainless. It takes a better edge than most stainless steels and it sharpens faster, and the price of that is that it will stain and rust if you put it away wet, particularly after blood contact.

The mirror polish is a real hand polish through progressive grits, not a plated coating, which is why it shows a true reflection rather than a haze. A polished blade also releases from wet hide slightly better than a satin one. The rune line is acid etched into the surface. It is not Damascus and there is no pattern welding in this blade at all: it is monosteel 1095 with a surface etch.

The handle is genuine stag antler, which is naturally grippy when wet in a way that no polished synthetic can match, and no two pieces are alike. The brass bolster locks the scales to the tang and gives the hand a stop against sliding onto the edge.

Engraving, runes and your own design

Use the rune converter on this page to turn a name, a date or a short phrase into Elder Futhark and we will cut it into the steel or the leather. If you would rather have a Viking pattern than a rune line, choose your own design in the engraving option above the add to cart button and tell us where it goes. Where a piece already carries an engraved design, your chosen engraving replaces it rather than sitting alongside it. On this knife your line takes the place of the futhark already on the blade flat, or we can put it into the leather sheath and leave the steel plain. See the engraving page.

Carry and the sheath

The sheath is vegetable tanned leather, wet formed to this exact blade, saddle stitched and burnished at the edges, with a belt loop that takes a standard belt. Wet forming matters on a sheath: it means the leather grips the ricasso and the bolster rather than relying entirely on a retention strap, so the knife does not rattle and does not fall out when you crouch.

Never store a carbon steel blade in a leather sheath long term. Leather is tanned with acids and it holds moisture, and a knife left in a sheath for a month will come out marked. Carry it in the sheath, store it out of it. Check your state and local law on fixed blade carry before wearing it anywhere but your own property or a hunting camp.

Care

Clean and dry the blade the moment you are finished, especially after blood, which is acidic and will etch 1095 within hours. Wipe a light film of food safe mineral oil or a light machine oil onto the blade before it goes away. Sharpen the main edge on a stone at the angle it arrives at, and sharpen the gut hook with a round ceramic rod or a chainsaw file run inside the throat, never on a flat stone, which cannot reach the curve. If a patina forms on the flats, that is normal for carbon steel and it is protective; active orange rust is not and should be removed with a fine abrasive and oil. Feed the sheath with a neutral leather conditioner twice a year. More on this is on the steel care page.

Forged in Memphis

The blade is forged, ground, heat treated, polished and etched in our shop in Memphis, Tennessee, the antler is cut and fitted here, and the sheath is cut, wet formed and stitched here. Nothing is drop shipped from an importer catalogue and stamped with our name. The lifetime warranty against defects in the forging, the grind, the heat treat and the fittings covers this knife with no end date and no receipt needed.

A note on handmade variation

This knife is hand made, not machine made or bulk produced. What arrives will not be a pixel for pixel copy of the photograph. Stag antler is a natural material and every piece has its own colour, its own pearling and its own texture, so your handle will not match the one shown. The polish carries its own grind lines, the etched rune line sits a fraction differently, and the leather takes dye its own way. The steel, the dimensions and the geometry are the same every time. The character is not.

Frequently asked questions

Is this stainless steel?

No. It is 1095 high carbon, which takes a keener edge and sharpens far more easily than stainless, at the cost of needing to be dried and oiled. If you want a knife you can leave wet in a truck, this is not it.

How do I sharpen the gut hook?

With a round ceramic rod or a small round file worked inside the curve, following the existing bevel. A flat stone cannot reach into the throat of the hook and will only round the outside of it.

Is the pattern on the blade Damascus?

No. This is monosteel 1095 and the runes are an acid etch on the surface. There is no pattern welded steel in this blade, and we would rather say that than let the photograph imply it.

Will every handle look like the photograph?

No. Stag antler varies enormously in colour, pearling and shape between pieces. Yours will be recognisably the same knife and a genuinely different handle.

Is it sharp out of the box?

Yes, both the main edge and the hook are sharpened and ready to work. Treat it as a working hunting knife from the moment you open the box.

How long before it ships?

Processing is one to two weeks because each knife is forged, fitted and sheathed to order. Shipping inside the United States is free and returns are accepted within seven days.

What is in the box

  • One hand forged 1095 gut hook hunting knife, mirror polished
  • Genuine stag antler handle with a brass bolster and lanyard hole
  • Etched Elder Futhark line on the blade flat
  • Wet formed tan leather belt sheath
  • Care and warranty card
  • Forged and finished in Memphis, Tennessee

Explore the range

See the rest of the hunting knives, the throwing knives, the engraved and personalised pieces, and the guides.

Additional information

Customer Reviews

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In

Add these too

Shipping, returns and ageBlades are sold to adults aged 18 and over. Delivery times are on the shipping page, the lifetime warranty and returns process are on the returns page, and storage advice is on safety and storage. Every piece is forged in Memphis, Tennessee. See country of origin.

Know what you are buying